Cleaning the Pre-Filter
For best performance vacuum pre-filter once a month
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
1. Open the rear grill cover by gently pushing
down on the tab on the top of the grill cover.
Fig. 1
2. Open the cover outward until the tabs at
the bottom of the grill cover easily slide
away from the unit. Fig. 2
3. Remove the PetPlus Odor filters and set aside.
Remove the Pre-Filter from the grill cover.
Fig. 3
4. Use the brush attachment with your vacuum
cleaner. Run the attachment along both sides of
the Pre-Filter cleaning it thoroughly. Fig. 4
5. Then place the Pre- Filter back in the grill
cover, making sure it is seated in place on the
frame (Fig. 5). Place the PetPlus Odor Filters
back into the grill cover, seating them on the
rails with the pull tab facing outward at the top of
each filter.
6. Place the tabs at the bottom of the grill cover
into the base of the unit. Gently push the grill
cover back into place until you hear a click
sound indicating that the grill cover is firmly
latched. Fig. 6
DO NOT WASH ANY OF THE FILTERS. DO
NOT IMMERSE IN WATER.
1 0
Cleaning and Maintenance
For best performance, we recommend:
• NEVER use water or any household cleaners or detergents to clean
the filters.
• Clean off the outside of the unit with a dry cloth once a month
• NEVER use water, wax, polish, or any chemical solution to clean the
outside of the unit
• Clean off the grill cover using a damp cloth or the brush attachment
of your vacuum once a month
• NEVER use wax, polish, or any chemical solution to clean the grill cover
• Replace the True HEPA filters every 12 months
• Replace the PetPlus Odor filters every 6 months
• Vacuum the pre-filter once a month
• If you will not be using the air purifier for an extended period of
time, please store in the box, or a cool, dry place.
11