Filter Replacement; Cleaning & Maintenance - HoMedics AP-T10-EU Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14

FILTER REPLACEMENT

REPLACE FILTER LIGHT
The replace filter light illuminates when it is time to replace the
HEPA-type filter based on the air purifier's hours of use.
REPLACING THE HEPA-TYPE FILTER
For optimal performance, replace every 12 months under normal
usage conditions.
1. Unplug the air purifier and turn
upside down. Turn the filter cover as
indicated to remove.
2. Remove the filter cover and set
aside.
3. Pull to remove the old filter
4. Slide the new HEPA-type filter into
the filter cavity.
5. Reinstall the filter cover and turn
to the right to lock in place.
6. Plug the power cord into a
standard AC outlet. Turn the air
purifier on. Press and hold the power
indicator.
button for 3 seconds to reset the
CLEANING & MAINTENANCE
CLEANING THE PRE-FILTER
NOTE: For best performance,
vacuum the pre-filter once a
month under normal usage.
1. Unplug the air purifier.
2. Remove the HEPA-type filter
as described in the Replacing
the HEPA-type Filter section.
3. Vacuum the outside of
the HEPA-type filter using
the brush attachment of your vacuum cleaner, cleaning it
thoroughly.
4. Place the HEPA-type filter back into the air purifier and close
grille.
5. Plug the power cord into a standard AC outlet.
TO CLEAN THE OIL TRAY
Open the oil tray and remove the
pad. Essential oil pads should be
changed when switching to a
different essential oil scent. If
continuing to use the same scent,
set the essential oil pad aside for
reuse. Wipe down the inside of
the oil tray with a soft cloth. Place the essential oil pad back in the
tray and close.
NOTE: Leave the essential oil pad out of the oil tray when storing.
WARNING: The appliance is only to be used with the
recommended vaporising medium. The use of other substances
may give rise to a toxic or fire risk.
FOR BEST PERFORMANCE
• NEVER use water or any household cleaners or detergents to
clean the HEPA-type filter.
• Clean off the outside of the unit with a dry cloth as needed.
• NEVER use water, wax, polish, or any chemical solution to clean
the outside of the unit.
• Clean off the grille cover using a damp cloth or the brush
attachment of your vacuum as needed.
• Vacuum the pre-filter monthly under normal usage conditions.
• Replace the HEPA-type filter every 12 months under normal
usage conditions.
• Always use a genuine HoMedics replacement filter for optimal
performance.
I
4
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido