Cleaning And Maintenance; Troubleshooting - HoMedics HEPA AF-100 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cleaning and Maintenance

For best performance, we recommend:
• Vacuum the HEPA filter using the brush attachment of your vacuum
cleaner once a month
• NEVER use water or any household cleaners or detergents to clean
the HEPA filter
• Clean off the outside of the unit with a dry cloth once a month
• NEVER use water, wax, polish, or any chemical solution to clean the
outside of the unit
• Clean off the grill plate using a damp cloth or the brush attachment
of your vacuum once a month
• NEVER use wax, polish, or any chemical solution to clean the grill
plate
• Replace the HEPA filter every 12-18 months
12

Troubleshooting

Problem
Possible Cause
Unit will not operate
• Unit is not plugged in
• No power to unit
Reduced airflow or
• The front grill may be
poor filtering
blocked
• HEPA filter may be
clogged
Excessive noise
• The unit is not level
CLEAN FILTER
• The filter needs to be
indicator light will
cleaned
not go off
• The filter needs to be
replaced
• CLEAN/RESET
FILTER INDICATOR
has not been reset
Solution
• Plug unit in
• Press the ON/OFF
button to turn the
power on
• Check circuits, fuses,
try a different outlet
• Check to make sure
nothing is blocking
the front grill and air
outlet
• Check and clean filter
• Replace the filter
• Place the unit on a
flat, level surface
• Remove filter from
unit and clean using
brush attachment on
your vacuum
• Replace filter –
Model # AF-100FL
• Press and hold the
CLEAN/RESET
FILTER INDICATOR
BUTTON until an
audible chime sounds
and the light turns off
1 3

Publicidad

Tabla de contenido
loading

Tabla de contenido