Diagnostic Functions - Bosch OBD1150 Info Scan Guia De Inicio Rapido

| OBD 1150 | Quick Start Guide | 31
en

6. 1 Diagnostic Functions

Vehicle Diagnostics
Use this function to select a vehicle and then proceed to the Diagnos-
tic Menu.
I/M Monitors
Displays a snapshot of the state of the vehicle's OBD II Monitors.
Read Codes
Reads DTCs from vehicle's computer with KOEO or KOER.
Erase Codes
Deletes DTCs from vehicle's memory.
MIL Status
Displays whether the Malfunction Indicator Lamp is on or off.
State OBD Check
Displays a basic status of the vehicle's OBD system.
View Data
Views vehicle Parameter Identification Data (PIDs) in real time. PIDs
are displayed in either a text format or graph format when available.
Record Data
Records vehicle PIDs while vehicle is parked or being driven. This
function is for diagnosing intermittent driveability problems.
View Freeze Data
Displays a snapshot of operating conditions at the time of a fault.
Drive Cycle Monitor
Displays the current state of the vehicle's OBD II Monitors in Real-
Time.
O2 Monitor Tests
The O2 Monitor Tests is NOT an ON-DEMAND TEST. This Function
displays oxygen sensor monitoring test results from the vehicle's
memory.
Diagnostic Monitor Tests
Reads test results for emission related powertrain components and
systems that are and are not continuously monitored.
On-Board Systems
Scan tool controls the operation of vehicle components, tests or
Bosch Automotive Service Solutions Inc. 579679 REV A | 03.2017