PAPILLON Duranius Manual De Instrucciones página 35

Cod. 99877 – DURANIUS
3.3 Installation
Before installing the filter on the
vacuum, clean the area of the lid so that
the retainer band will seal the bag
against the lid and stop small particles
from bypassing the filter bag.
If the filter is not clean or damaged,
replace it on the filter cage. If it can't
be reused, place a new filter over the
filter cage.
Replace the retainer band around the
filter. Make sure the retainer band is
positioned on the filter, and the filter
completely covers the filter cage. Also
make sure the edges of the filter are
completely secured under the retainer
band.
WARNING: Do not remove the filter cage
and float. The float prevents liquid from
entering the impeller and damaging the
motor. The cage prevents fingers from
touching the moving impeller.
3.4 Cleaning
To clean the tank:
4. Dump debris out.
5. Wash tank thoroughly with warm
water and mild-soap.
6. Wipe out with dry cloth.
3.5 Storage
Before storing your vacuum, the dust
tank should be emptied and cleaned.
35