Preparing Before Installing Wall- Mount On The Wall; How To Assemble The Stand-Base (Depending On The Model) - Samsung PS42A410 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 191
Moving to the remembered position
1
Complete Step 1 of Entering the menu.

Pressing a Color (Red, Green, Yellow) button moves the auto
wall mount to the saved position.
➢ You can move the wall mount to one of the 3 pre-set
positions by pressing the Red (Position 1), Green (Position
2) or Yellow (Position 3) buttons.
➢ If you adjust the positon after moving to a pre-set position,
the position display will disappear.
➢ For installation, refer to the Installation Manual provided with the wall mount.
➢ For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
➢ This installation manual is to be used when attaching the wall mount to a wall. When attaching to
other building materials, please contact your nearest dealer.
➢ 42 inches model is not compatible with the older wall mount model (WMN5090A).

Preparing before installing Wall- Mount on the wall

Case A.
Installing SAMSUNG Wall-Mount
1
Install Wall Mount with the torque range of 15kgf·cm or less. Make sure that parts can be damaged if
the torque is out of the specified range.

Accessory Kit contains Holder–Ring [①] for installing other company's Wall-Mount on Samsung TV.
(Case B)
How to assemble the Stand-Base
Using the 6 screws for securing the stand base and the
monitor, firmly attach the monitor to the stand base.
(The exterior of the set may be different than the picture.)
Warning
Firmly secure the stand to the TV
before moving it, as the stand may
fall and could cause serious injury.
Two or more people should carry
the TV. Never lay the TV on the
floor because of possible damage
to the screen.
Always store the TV upright.
English - 4
Position 1
Position
Adjust
Case B.
Installing other company's Wall-Mount
(depending on the model)
In case of installing your TV on the wall,
close the cover (1) on the stand-base
connection part using two screws for
hiding.
Wall-Mount Adjustment
1
2
Save
Center
3

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Ps42a412Ps50a410Ps50a412

Tabla de contenido