Seal here.
Seal bottom edge of track.
16. Final Caulking
IMPORTANT! Carefully follow the caulk or silicone sealant manufacturer's instructions for application
and curing time.
NOTE: Thoroughly clean and dry all dust, dirt, and grease from the bottom track and shower ledge
surfaces where caulk or sealant will be applied.
Carefully apply caulk or sealant where
the wall jambs and wall meet inside the shower.
the bottom track and wall jamb, and bottom track and center jamb join.
the wall jamb and bottom track meet, on the inside of the frame.
the center jamb and bottom track meet, on the inside of the frame.
the area of the bottom track meets the threshold or bath on the outside of the door.
1035946-2-B
Seal on inside edge of wall jamb/wall seam.
Seal here.
14
Inside of shower
Sterling