For Windows - Brother NC-2200w Guía De Configuración Rápida

To communicate with the un-configured
NC-2200w change your wireless computer
settings to:
Communication mode: Ad-hoc
Network name :
(SSID/ESSID)
Encryption:

For Windows

Windows NT
Please refer to your wireless card
manufacturer instructions for changing the
wireless settings, and then go to Step 3
Configuring the Print/Scan Server.
Step 3
Go to
If you are using Windows
X 10.2.4 and you are using its built in
Wireless Ethernet capabilities, use the
following steps for each Operating
System.
For Windows
1
Click Start and then Control Panel.
7
(channel 11)
SETUP
(case sensitive)
None
®
98/Me/2000,
®
4.0 Users
9
on page
®
XP or Mac OS
®
XP Users
2
Click the Network Connections icon.
3
Select and right click Wireless Network
Connection. Click View Available
Wireless Networks.
®
4
You can see the Network name
(SSID/ESSID) of the NC-2200w in the
Available wireless networks box.
Select SETUP and check the Allow me
to connect... check box. Click the
Connect button.
English