Activation - M-Audio iZotope Trash Guia De Inicio Rapido

Sonar
1. On an audio track, right-click on the "FX" section.
2. Select "Audio Effects", "iZotope", and "Trash".
Acid
1. Click the "Track FX" button located next to the volume and mute controls for each track. The "AUDIO
PLUG-IN" window should now be visible with the audio chain for the selected track.
2. If the "PLUGIN-CHOOSER" is not visible, click the "Edit Chain" button.
3. Select "Trash" under "Third Party" and "iZotope", and click "OK".
Cubase SX
1. Expand an audio track's "Inserts" list.
2. Select one of the free slots.
3. From the pop-up menu, select "DirectX" and then "iZotope Trash".
Audition
1. Load an audio file in "Edit View".
2. Select a portion of audio to be processed.
3. Select Ozone in the "Effects" -> "VST" -> "iZotope" -> "Trash...".
Others
Please consult your host application documentation or contact technical support.

ACTIVATION

Ozone will continue to run with full functionality for 7 days. After this period, the output will periodically be
silenced until the plug-in is fully authorized. When you are ready to authorize, have your serial number ready
and:
< Launch the plug-in, and click the "Authorize" button.
Challenge/Response
< Internet Authorization
1. Click the link in "Step 1".
2. On the web site, enter your serial number, user name, and password, or follow the instructions to
register and create a new account.
3. Copy the resulting Response.
4. Paste the Response into the box in "Step 2" and click "Next" to complete authorization.
< Manual Authorization
1. On the computer you want to authorize, write the challenge in "Step 1".
2. On a computer with internet access, visit http://www.izotope.com/activate.html.
3. Enter your serial number, user name, and password, or follow the instructions to register and create a
new account.
4. Select the product you want to authorize by clicking "authorize with challenge/response".
5. Enter the Challenge you wrote down and click "Submit".
6. Type the resulting Response into the box in "Step 2" and click "Next" to complete authorization.
iLokTM Smart Key
The iLok is only available for the Pro Tools plug-in formats.
1. Visit http://www.izotope.com/activate.html.
2. Enter your serial number, user name, and password, or follow the instructions to register and create
a new account.
3. Select the product you want to authorize by clicking "authorize with iLok".
4. Enter your iLok User ID (visit www.ilok.com to create one for free).
5. Login to your account at www.ilok.com and transfer the asset to your iLok Smart Key.
6. Insert the iLok into an open USB port on the computer that you wish to use the plug-in and you will be
automatically authorized.
4