Configuring The Solar System - Bosch Thermotechnik EMS 2 Manual De Usuario

30 | Commissioning
4.3

Configuring the solar system

▶ Open the Solar settings > Change solar configuration menu in the
service menu.
▶ Turn the selector to select the required function.
▶ Press the selector to confirm the selection.
ok
Example configuration of solar thermal system 1 with functions G, I and K
ok
ok
ok
ok
Solar configuration completed...
Table 15
6 720 815 257 (2014/10)
▶ Press the Back key
up to that point.
▶ To delete a function:
– Turn the selector
(reverse alphabetical order). is displayed.
– Press the selector
– The last function alphabetically is deleted.
▶ Solar thermal system (1) is preconfigured.
▶ Select and confirm 2nd coll. array (G).
Selecting a function automatically restricts the functions that can subsequently be
selected to those that can be combined with the functions that have previously been
chosen.
▶ Select and confirm Therm.dis./daily heat-up (K).
As the Therm.dis./daily heat-up (K) function is not available in every solar system, this
function is not shown in the illustration even though it has been added. "K" is added to
the name of the solar system.
▶ Select and confirm Transfer system (I).
To complete the solar system configuration:
▶ Confirm the current system configuration.
to go back to how the system was configured
until the text Delete last function
.
ok
MS 200