6.0 MAINTENANCE
6.1 A
DVICE AND MAINTENANCE WARNINGS
• Before any service on the machine AL-
WAYS disconnect it from the electrical
source.
• Never use flammable products to clean
the machine.
• All services not described in this manual
must be effected ONLY by qualified person-
nel.
• ALWAYS use proper safety equipment.
E
A
18
C
6.2 T
YPICAL MAINTENANCE
DAILY:
• To keep the machine in good conditions clean follow-
ing:
- floor surrounding,
- machines' components,
- water tank,
- water pump E (Fig. 12) inlet.
• Grease sliding guides at grease fittings A (Fig. 12)
using a manual grease gun B (Fig. 12)
Recommended Grease: General purpose #2 Lithum
based grease without molybedenum disulfide.
EVERY 2 WEEKS:
• Put grease on the vertical screw C (Fig. 12) using a
small brush D (Fig. 12)
Recommended Grease: General purpose #2 Lithum
based grease without molybedenum disulfide.
D
B
Fig.12