Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
0AF04066
Copyright © October, 1999 DBInc.
Printed in U.S.A.
OPERATING INSTRUCTIONS AND PARTS LIST
INSTRUCCIONES DE OPERACIÓN Y LISTA DE PIEZAS
STONE LITE
MODEL: SLT-143
230V/60/1
17400 West 119th Street
Olathe, Kansas 66061
Customer Service ....... 800-365-4003
Corporate Office .......... 913-928-1000
Cust. Service Fax ....... 800-825-0028
Corporate Office Fax .. 913-438-7951
1
Publicidad
Tabla de contenido
Manuales relacionados para Felker STONE LITE SLT-143
Resumen de contenidos para Felker STONE LITE SLT-143
- Página 1 OPERATING INSTRUCTIONS AND PARTS LIST INSTRUCCIONES DE OPERACIÓN Y LISTA DE PIEZAS STONE LITE MODEL: SLT-143 230V/60/1 17400 West 119th Street Olathe, Kansas 66061 Customer Service ..800-365-4003 Corporate Office ..913-928-1000 0AF04066 Cust. Service Fax ..800-825-0028 Copyright © October, 1999 DBInc. Corporate Office Fax ..
-
Página 2: Tabla De Contenido
EVERY MACHINE IS THOROUGHLY TESTED BEFORE LEAVING THE FACTORY. EACH MACHINE IS SUPPLIED WITH A COPY OF THIS MANUAL. OPERATORS OF THIS EQUIPMENT MUST READ AND BE FAMILIAR WITH THE SAFETY WARNINGS. FAILURE TO OBEY WARNINGS MAY RESULT IN INJURY OR DEATH. -
Página 3: Symbol Definitions
Symbol Definitions Definición De Los Simbolos • Please Read The Instructions For Use Prior To Operating The machine For The First Time. • Antes De La Puesta en Marcha, Lea Detenidamente Las Instrucciones Y Familiaricese Con La Máquina. • Mandatory •... - Página 4 • Use In Well Ventilated Area • Usar En Una Área Bien Ventilada • Do Not Use In Flammable Areas • No Usar In Áreas Inflamables • Machinery Hazard, Keep Hands And Feet Clear • Máquina Peligrosa - Mantenga Manos Y Pies Alejados De La Máquina •...
- Página 5 • Remove Tools From Area and Machine • Elimine Las Herramientas Del Área Y De La Máquina • Lubrication Point • Punto De Lubrication • Electrical Switch - OFF • Conmutador De Apagado Eléctrico • Electrical Switch - ON • Conmutador De Encendido Eléctrico •...
- Página 6 • Positive Battery Terminal • Terminal Positivo De Batería • Blade Indicator -Zero • Indicador De Cero De La Hoja • Electric Motor • Motor Eléctrico WARNING HEARING HAZARD DURING NORMAL USE OF THIS MACHINE, OPERATOR MAY BE EXPOSED TO A NOISE LEVEL EQUAL OR SUPERIOR TO 85 dB (A) ATENCION RIESGO DE DAÑO AUDITIVO...
-
Página 7: Decal Descriptions And Locations
DECAL DESCRIPTIONS AND LOCATIONS DESCRIPCIÓN DE CALCAMONIAS Y UBICACIONES P/N 161459, Felker Yellow Location: Blade Guard Quantity: 1 P/N 169559, STONE LITE Location: Each Side Of The Pan Quantity: 2 P/N 178368, Warning Location: Motor Assembly Quantity: 1 P/N 169343, Warning... -
Página 8: Safety First
SAFETY FIRST! WARNINGS DO’s AND DO NOT’s WARNING: FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY. read this entire operator’s manual before operating this machine. Understand all warnings, instructions, and controls. keep all guards in place and in good condition. - Página 9 SAFETY FIRST! WARNINGS DO’s AND DO NOT’s WARNING: FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY. DO NOT DO NOT operate this machine unless you have read and understood this operator’s manual. DO NOT operate this machine without the blade guard, or other protective guards in place.
-
Página 10: Instructions
(25.4mm) supports. (Immobilize head at front end of rail with the locking knob to hold in place while tipping the (Information from your usual Felker supplier.) back end of the table.) Check that the legs are all locked into their Depths of Cut (Maximum): at 90°: 4"... -
Página 11: Electrical Equipment
• Check correct positioning on inner flange ADJUSTMENTS (Fig. 2 - F). • Refit the flange and retighten the flange bolt; turn Always disconnect the saw from the power counterclockwise to tighten. source before making adjustments. • Refit the guard and retighten the handknobs. •... -
Página 12: Cutting Method
IMPORTANT ADVICE CUTTING METHOD • Tighten all the nuts and bolts regularly. • Square Cuts Push the cutting head towards the rear, • When storing the machine, we recommend removing Position the material on the table, the blade and storing it carefully. Pull the head towards yourself whilst gradually forward into and through the material (avoid •... - Página 13 NOTES:...
-
Página 14: Seguridad Ante Todo
¡SEGURIDAD ANTE TODO! ADVERTENCIAS HACER y NO HACER ADVERTENCIA: EL NO RESPETAR ESTAS ADVERTENCIAS E INSTRUCCIONES DE OPERACION PUEDE PROVOCAR GRAVES LESIONES O LA MUERTE. HACER lea todo el manual antes de manejar esta máquina. Entienda todas las advertencias, instrucciones y controles. mantenga siempre las protecciones en su lugar y en buenas condiciones. - Página 15 ¡SEGURIDAD ANTE TODO! ADVERTENCIAS HACER y NO HACER ADVERTENCIA: EL NO RESPETAR ESTAS ADVERTENCIAS E INSTRUCCIONES DE OPERACION PUEDE PROVOCAR GRAVES LESIONES O LA MUERTE. NO HACER haga funcionar esta máquina sin antes haber leído y entendido este manual. maneje esta máquina sin tener la protección de la hoja u otras protecciones instaladas en su lugar. se sitúe detrás del paso de la hoja mientras el motor está...
-
Página 16: Instrucciones
1" (25,4 mm) calibre extremo trasero de la mesa). Ver que las patas estén todas bloqueadas en su (Para información contactar a su proveedor Felker.) posición correcta. Apoyar la mesa sobre las cuatro patas y com Profundidades De Corte (Máximo): a 90: 4" (100 mm), probar que la sierra esté... -
Página 17: Equipo Eléctrico
• Volver a colocar la brida y apretar el perno de la brida; AJUSTES girar en sentido contrahorario para apre tarla. • Volver a colocar el protector y reapretar las perillas. Siempre desconectar la sierra del suminis- tro eléctrico antes de hacer ajustes. EQUIPO ELÉCTRICO •... -
Página 18: Método De Corte
MÉTODO DE CORTE AVISO IMPORTANTE • Apretar las tuercas y pernos regularmente. • Cortes en ángulo recto Empujar la cabeza de corte hacia la parte trasera. • Para guardar la máquina, recomendamos sacar la hoja Colocar el material en la mesa. y guardarla cuidadosamente. -
Página 19: Diagrams And Spare Parts
FIGURE 1 - CUTTING HEAD ASSEMBLY FIGURE 1 - CUTTING HEAD ASSEMBLY (10/99) DIAG. PART QTY. DIAG. PART QTY. LOC. REQ. DESCRIPTION LOC. REQ. DESCRIPTION 178300 Cover, Blade Guard 193036 Bearing Cover 139746 Washer, Flat M6 197230 Nut, Hex Jam, M8 178027 Pop Rivet 193038... - Página 20 INSTALLATION OF NEW UPPER GUARD FIGURE A 1. Place support material (1) under the Motor to prevent it from dropping down while adapting the new Upper Guard and Roller features. 2. Loosen and remove the Locking Handle (2). 3. Unscrew and temporarily remove the Depth Stop (3). 4.
- Página 21 FIGURE 2 - ELECTRICAL PARTS FIGURE 2 - ELECTRICAL PARTS (as of 6/98) DIAG. PART QTY. DIAG. PART QTY. LOC. REQ. DESCRIPTION LOC. REQ. DESCRIPTION 169708 Switch Assy (Includes Power Cord) 178092 Washer, M8 197227 Capscrew, Hex Hd. M8 x 1.25 x 20 178354 Screw 178369...
- Página 22 FIGURE 3 - RAIL ASSEMBLY FIGURE 3 - RAIL ASSEMBLY DIAG. PART QTY. DIAG. PART QTY. LOC. REQ. DESCRIPTION LOC. REQ. DESCRIPTION 178302 Water Tubing, Plastic 178347 Sheath 178085 Capscrew, Hex Hd. M6 x 1.0 x 20 178346 Ty-Wrap 178089 Washer, M6 178327 Nut, Dome M8...
- Página 23 FIGURE 4 – TABLE ASSEMBLY FIGURE 4 - TABLE ASSEMBLY DIAG. PART QTY. DIAG. PART QTY. LOC. REQ. DESCRIPTION LOC. REQ. DESCRIPTION 178329 Rubber Top, Small 178324 Spacer, Pivot 178330 Capscrew 178323 Spring Washer 178331 Backstop, Long 178326 Knob 178316 Backstop, Short 178325 Spacer...
-
Página 24: Wiring Diagrams
FIGURE 5 - WIRING DIAGRAM CONNECTION POWER SOURCE: 230V 60 Hz 1-Ph FULL LOAD: 15.4 AMPS (PUSH BUTTON SWITCH) BROWN BLUE GREEN / YELLOW GROUND (EARTH) LINE PLUG 250V - 20A (L6-20P) GREEN L. BROWN L. BLUE WATER PUMP GREEN / YELLOW GROUND (EARTH) D. -
Página 25: Warranty
3. Felker’s obligation under this warranty is expressly limited to the replacement or repair at Felker, Olathe, KS 66061, or at a service facility designated by Felker, of such parts as inspection shall disclose to have been defective. This warranty does not cover labor, except for gas powered Quickie Super saws and does not cover maintenance items such as belts, air filters, bearings and wheels. - Página 26 Cust. Service FAX …………………… 800-825-0028 FAX …………………………………… 8142-798-7515 Corp. Office FAX ..…………………..913-438-7951 E-mail ………………… fwnh9794@mb.infoweb.ne.jp Cust. Service, Int'l. …………………… 913-928-1300 Felker Australia, New Zealand/Dembicon Pty. Ltd Int'l. E-mail ..……………….…. rcoats@db-inc.com 29 Kinkaid Avenue North Plympton, Adelaide SA 5037 Western Division Center...