Klarstein QUICKSTICK SMART Manual Del Usuario página 21

2. Position the flow openings on the side of the pump cover as desired. Insert the
retaining tabs into the slots, then turn the cap counterclockwise to lock it in place.
Flow opening
Calibration of the temperature sensor
The temperature sensor on the sous-vide stick is extremely accurate and is calibrated
at the factory. However, if you want the readings on the stove to match those of your
thermometer, follow these steps to recalibrate the sous-vide stick.
1. Determine the difference between the temperature reading on the sous-vide stick
and the temperature reading on your thermometer. You can change the display on
the stove by up to ± 9.9 °C.
2. Press and hold the temperature button for about 5 seconds. The display shows 0.0°.
3. Press the adjustment buttons (+/-) to add or subtract up to 9.9 °C.
4. Press the temperature button again to save the set value.
EN
21