Kohler K-T428 Guia De Instalacion página 6

Lever
Handle
Assembly
Plug
Button
Setscrew
Escutcheon
4. Install the Handles
Stately Handles
Apply a bead of plumbers putty or other sealant around the
bottom of the escutcheon according to the putty manufacturer's
instructions.
Position the escutcheons over the valves.
Install the threaded sleeves to the valves. Securely hand tighten.
Fit the handle assemblies over the valves, and align them so the
setscrews are not easily seen. Orient the lever handles with the
levers pointing away from the spout while in the closed position.
Tighten the setscrews.
Press a plug button into each setscrew hole.
Remove any excess plumbers putty.
1049622-2-B
Plug
Button
Setscrew
Cross
Handle
Assembly
Sleeve
Valve
6 Kohler Co.