13. Apply Silicone Sealant
- Make sure surfaces to be sealed are clean.
- Apply sealant to both sides of wall jambs.
- Also apply sealant where each wall jamb and bottom track meet.
- Allow sealant to cure fully before using shower/bath.
14. Install Screw Covers
- Install (6) screw covers over wall jamb screws.
- Install (2) screw covers per panel over bottom frame screws (6 total).
- Install (2) screw covers over inside panel guide screws.
C
1017313-2-
Apply silicone
sealant
Wall Jamb
Screw Cover
Bottom
Track
12
Sterling