Before You Begin - Kohler Sterling Finesse 5700 Serie Manual Del Usuario

Thank You For Choosing Sterling
Thank you for choosing a quality bath and shower door by Sterling. Sterling products provide unsurpassed value
and dependable performance that will satisfy you for years to come.
Please take a few minutes to study these Installation Instructions. Save these instructions for future reference.
All information in this manual is based upon the latest product information available at the time of publication.
At Sterling, we constantly strive to improve the quality of our products. We therefore reserve the right to make
changes in product characteristics, packaging, or availability at any time without notice.
Recommended Tools and Materials
Safety Glasses Measuring Tape
Drill & 3/16" Masonry Drill Bit
Miter Saw or Hack Saw
with 32 teeth per inch blade

Before You Begin

CAUTION: Risk of injury or product damage. Tempered glass cannot be cut.
- Before starting the installation, lay out and identify all of the parts. Inspect for damage.
- Shower bath or receptor should be installed/prepared at this time, including finished wall materials.
- The reversible top track may be installed with the rounded side out for a contemporary look, or with the flat side
out for a more traditional look. For the purposes of these instructions, the top track will be installed with the
rounded side out (away from the shower wall).
NOTE: Towel bars are NOT designed or intended for use as grab bars.
C
1017313-2-
Pencil Level
Assorted Screwdrivers
Masking
Pliers
Tape
2
Plus:
Drop Cloth
Fine flat tile
Silicone Sealant
Center Punch
Utility Knife
Hammer
Sterling