If You Have Setup Problems; Contacting Customer Service - Bose VIDEOWAVE Guia De Instalacion

Tab 8, 16 Tab 7, 15
I
NTERACTIVE SETUP
5. When the system is started up for the first time the
following instruction appears on the monitor in
many languages:
"Press and hold the OK button on the Bose remote
until the screen turns black."
Press and hold OK
until the screen
turns black.
Be sure to perform this step as written. It ensures
that the remote can communicate with the control
console.
6. Follow the instructions on the monitor screen to
complete your system setup.
The Unify TM intelligent integration system will lead
you through the remaining setup steps:
• Select your language.
• Run the ADAPTiQ ® audio calibration system.
• Connect and set up audio/video devices using
the Unify intelligent integration system.
18
Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11

If you have setup problems

If you experience setup problems, the Unify intelligent
integration system can help you identify the issue.
Once the issue is addressed, you can return to the
Unify setup process at any time. Press the Setup
button on the control console to activate the Unify
system menu. See "Changing Your System Setup" in
your system Operating Guide.
For help in trying to resolve any problems, see the
troubleshooting table in your system Operating Guide.

Contacting customer service

For additional assistance, contact Bose
Service. See the contact list included with the system in
Kit 2.
iPod is a trademark of Apple, Inc., registered in the U.S. and
other countries.
HDMI and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
Tab 2, 10 English
® Customer