OPERATION ___________________________
Settings
Your appliance has the following setting
options:
Temperature level/
blower level
– 0 :
off
– 1 :
gentle air flow and moderate
temperature for gentle drying
and styling
– 2 :
stronger airflow and high tem-
perature for faster drying and
styling
Cold air setting
– d :
interrupts the hot air supply and
provides cold air for fixing a
hairstyle
Changing the styling
attachments
1 Remove the styling attachment
pulling it off.
2
Place a different styling attachment
and allow it to latch in place.
Notes:
The size of curls depends on the di-
7
ameter of the styling attachment.
C
C
B
by
The styling attachment with a diam-
7
eter of 16 mm creates small curls and
is especially suitable for short hair.
The styling attachment with a diam-
7
eter of 19 mm can be used to attain
greater volume and medium sized
curls with longer hair.
Operation
1
Towel dry your hair thoroughly after
washing and let it dry for a little
while.
2
Plug the power cord
socket.
3
Turn on the appliance with the
switch
C
and set the temperature
and blower level.
4
If required you can interrupt the hot
air supply when drying by turning
the switch
to »
C
(cold air setting).
Note
The cold air setting interrupts the hot
7
air operation and provides a cool air
flow. This allows you to fix your hair-
style better and more lastingly.
After rolling in the hair section
5
allow the heat to set for few
seconds.
into the wall
D
«
d
ENGLISH
19