Wall Mounting - Klarstein BERN Manual Del Usuario

WALL MOUNTING

The fireplace can be mounted on the wall. Before fixing the fireplace, make sure that the
fireplace is on a level surface.
1 Use a pen to mark the position of the holes for the supplied bracket.
2 Drill holes in the back of the fireplace with a thin drill bit (2 mm).
3 Fasten the brackets to the fireplace with the 4 white screws.
4 Place the heater on the wall and mark the position of the bracket holes on the wall
with a pen. Then remove the heater from the wall.
5 Drill holes in the wall with a drill bit (6 mm) and insert the two plugs supplied.
6 Place the heater back on the wall and fasten it with the two long screws.
Brackets x2
Plug x2
Black
screw x4 screw x4
Long screw x2
Black
screw x4
White
White
Bracket
screw x4
EN
21