Display Screens - Klarstein BERN Manual Del Usuario

Timer button

DISPLAY SCREENS

• While the unit is on, press this button to set the time
until it switches off automatically. You can set 0 - 9
hours in 1-hour increments. As soon as the time you
set has elapsed, the fire will automatically go out.
• To adjust the colour of the backlight, keep this key
pressed until you hear a beep and „F1" is displayed
on the screen. Then press the timer button repeatedly
to select one of the colours. Once you reach „F9",
the setting mode is exited and the colour selection
starts again.
EN
23