Commissioning And Operation - Klarstein BERN Manual Del Usuario

EN
24

COMMISSIONING AND OPERATION

On/Off
• Press the Power button to switch the unit on/off.
• In standby mode, press and hold the Power button for 3 seconds to reset the
wireless network.
• Press and hold the Power button for 5 seconds in standby mode to toggle between
Celsius and Fahrenheit.
Flame Controller
• Press the Flame button repeatedly to adjust the flame brightness. There are 5 levels.
5 is the highest level and 1 is the lowest level.
• Press and hold the Flame button for 5 seconds to enter the Flame color setting.
Afterwards you can choose between the colours C1 •
several times.
C1 Warm White + Red + Blue
C2 Warm white + red
C3 Red + Blue
C4 Warm white + blue
C5 Blue
C6 Red
C7 Warm white
Heat controller
• Press the Heat button repeatedly to select between the different heat levels. The
level you select is indicated on the screen by a bar. When the small bar lights up, a
low heat level is set. When both bars are lit, a high heat level is set.
• Press and hold the Heat button for 5 seconds to set the desired heating temperature.
You can set a temperature between 18 and 35 °C.
C7 by pressing