Tools And Materials; Before You Begin - Kohler K-10087 Manual Del Usuario

Tools and Materials

Solder
1-1/8"

Before You Begin

NOTICE: Follow the installation dimensions precisely.
Observe all local plumbing and building codes.
Shut off the main water supply.
When planning the installation, ensure the spout location will
conform to all local plumbing codes and national consensus
standards for minimum air gap requirements.
Several hardware kits are provided. If the finished wall is 1/4" (6
mm) to 5/8" (1.6 cm) thick, select hardware kit 1085746. If the
finished wall is 5/8" (1.6 cm) to 1-1/4" (3.2 cm) thick, select
hardware kit 1085745.
Give special consideration to the exact location desired for the
lavatory faucet. This product is designed to give you the
opportunity to be creative and flexible with the installation.
Site preparation and wall finishing may require additional tools
and materials.
Kohler Co. reserves the right to make revisions in the design of
faucets without notice, as specified in the Price Book.
1139731-2-A
#10 x 1"
Bucket
Wood Screws
2
• Copper Tubing
Kohler Co.