Cleaning And Care; Troubleshooting; Disposal Considerations; Declaration Of Conformity - Klarfit 10015802 Manual Del Usario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

● Before beginning any maintenance, make sure that you turn off the power switch and unplug the
power cord from the electrical outlet.
● Use a soft, dry cloth to clean the device. Do not use chemical agents such as benzene, alcohol,
gasoline, etc., otherwise the surface face of the treadmill may be damaged.
● To clean the display, please use a soft, dry cloth. Do not use a wet cloth to clean the display or the
switch.
● Do not place the treadmill in damp or dust-intensive areas. Moisture and dust may cause mecha-
nical damage.
● Only place the treadmill on fl at surfaces.
Error
No function.
No function.
The set speed is not reached.
According to the European waste regulation 2012/19/EU this symbol on the product
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for the environment and hu-
man health, which could otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling of this product, please contact
your local council or your household waste disposal service.
Your product contains batteries covered by the European Directive. 2006/66/EC, which cannot be
disposed of with normal household waste. Please check local rules on separate collection of batteries.
The correct disposal of batteries helps prevent potentially negative consequences on the environ-
ment and human health.
Manufacturer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin.
This product complies with the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
DIN EN 957
7

Cleaning and Care

Troubleshooting

Cause
Power cord not plugged in.
On / off switch is switched off . Turn on the treadmill with the
The current voltage is too low. Wait until the voltage is OK.

Disposal Considerations

Declaration of Conformity

Solution
Plug in power cord.
on / off switch.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10015803

Tabla de contenido