Auditing: Dumping The - Tripp-Lite B002A-DP2A2 Manual Del Propietário

Miscellaneous KVM Functionality
8. When registration is completed, the KVM will list the information of the newly configured peripheral on the screen and
vibrate 3 times.
Auditing: Dumping the Event Log
Note: The following steps are intended for the system administrator.
The Event Log is a detailed report of critical activities stored in the KVM or KVM memory. To view or dump the Event Log,
follow the instructions below:
Note: Only one computer connected to port 1 is required for this operation.
1. Open the Administration and Security Management Program (see the EDID Learn section for download instructions).
The Administration and Security Management screen will appear.
2. Initiate the session by pressing the following hotkey command. Hit each key one after another:
[Alt][Alt][c][n][f][g]
3. Upon completing the command, the mouse connected to the KVM will stop functioning. A prompt will appear to enter
the Credential ID.
4. Log in by entering the default username admin and pressing Enter.
5. Enter the default password 12345 and press Enter.
10