Tripp-Lite B002A-DP2A2 Manual Del Propietário página 11

Miscellaneous KVM Functionality
6. Request a Log Dump by selecting option 5 in the menu.
Reset: Restore Factory Defaults
Note: The following steps are intended for the system administrator.
Restore Factory Defaults will reset all settings on the KVM to their original state:
• CAC port registration will be removed
• KVM settings will be reset to factory defaults
To restore factory defaults, follow the steps below:
Note: Only one computer connected to port 1 is required for this operation.
1. Open the Administration and Security Management Program (see the EDID Learn section for download instructions).
The Administration and Security Management screen will appear.
2. Initiate the session by pressing the following hotkey command, one key after another:
[Alt][Alt][c][n][f][g]
3. Upon completing the command, the mouse connected to the KVM will stop functioning. A prompt will appear to enter
the Credential ID.
4. Log in by entering the default username admin and pressing Enter.
5. Enter the default password 12345 and press Enter.
6. Select option 7 from the menu on your screen and press Enter to restore the KVM to its factory default settings.
Note: A comprehensive feature list and instructions for the Administration and Security Management Utility can be found in the
Administrator's Guide available at tripplite.com/support.
11