Installation - Lorex E881AP Serie Guia De Inicio Rapido

Installation

4
Step one.
1. Attach the rubber ring to the
back of the wall mount.
2. Use the allen key (A) with the
flat end to attach three M6x14
screws (see Figure 1). Do not
tighten all the way.
3. Use the wall mount to mark
holes for the mounting
anchors and cables.
4. Drill holes (drill bit size - 3/8")
to a depth of 2.8"/70mm in
the mounting surface.
5. Insert the mounting anchors.
Figure 1
Wall mount
M6x14 screws (x3)
Rubber ring