testo 150 Manual De Instrucciones página 10

10 8. Settings
7.3 Setting alarm limits
Instrument is switched on.
1 Show set upper alarm value ( ):
-or-
Show set lower alarm value ( ):
2 Set alarm value:
speed.
3 Return to measurement:
If necessary repeat the procedure for the upper and lower alarm
value.
8. Settings
The instrument is switched off.
1 Open configuration mode: Keep
2 Select temperature unit (°C or °F):
Confirm selection:
3 Switch Auto Hold on (
Confirm selection:
If Auto Hold has been switched on:
Set time duration (5, 10, 15 or 20s) at which a reading has to be
stable (change lower than 0.2°C) for it to be frozen:
. Confirm selection:
4 Switch sound (
Confirm selection:
5 Switch light (
Confirm selection:
6 Switch Auto Off on (
Confirm selection:
- Configuration is complete. The instrument changes to the
measurement mode.
or . Keep button pressed to increase setting
.
.
) or off (
.
.
) on ( ) or off (
.
) on ( ) or off (
.
) or off (
.
.
.
pressed.
.
): .
): .
): .
): .