Axxess AX-TOYRSAV Instrucciones De Instalación

Installation Instructions for AX-TOYRSAV
AX-TOYRSAV
Toyota RSE Retention Harness
2007-2010
INTRODUCTION
The AX-TOYRSAV is designed to provide an audio/video input
to the OEM overhead video screen from the aftermarket radio.
APPLICATIONS
TOYOTA (NAV MODELS ONLY)
4-Runner 2008-2009
Highlander 2008-2010
CAUTION!
All accessories, switches, climate controls panels, and especially air bag
indicator lights must be connected before cycling the ignition. Also, do not remove
the factory radio with the key in the on position, or while the vehicle is running.
Axxess Integrate axxessinterfaces.com • metraonline.com
REV. 2/3/16 © COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
Sequoia 2008-2009
Sienna 2008-2010
Tundra 2007-2009
Installation Instructions for AX-TOYRSAV
INTERFACE COMPONENTS
• AX-TOYRSAV harness
TOOLS REQUIRED
• Cutting Tool • Tape • Crimping Tool
• Connectors (i.e. butt-connectors, bell caps, etc.)
CONNECTIONS TO BE MADE
From the AX-TOYRSAV harness to the aftermarket radio:
• Connect the Red RCA jack to the right A/V-OUT jack.
• Connect the White RCA jack to the left A/V-OUT jack.
• Connect the Yellow RCA jack to the video A/V-OUT jack.
INSTALLING THE AX-TOYRSAV
• Connect the AX-TOYRSAV harness to the factory harness
located in the radio cavity.
Axxess Integrate axxessinterfaces.com • metraonline.com
REV. 2/3/16 © COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION