Adjusting The Tone (Remote Control Only); Adjusting The Brightness Of The Front Panel Display (Remote Control Only); Charging With The Charging Port - Yamaha TSX-B235 Manual De Instrucciones

Ocultar thumbs Ver también para TSX-B235:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ADJUSTING THE TONE (remote control only)

1
ADJUSTING THE BRIGHTNESS OF THE FRONT PANEL

CHARGING WITH THE CHARGING PORT

6
En
2
3
DISPLAY (remote control only)
1
During playback, press the LOW, MID, or
HIGH EQ button on the remote control.
Select the tone to be adjusted (LOW, MID, HIGH).
2
Press
/
to adjust the tone.
3
Press ENTER on the remote control to
complete the operation.
You can also press the EQ button that you pressed in
Step
to complete the settings.
1
If you want to adjust another frequency band, return to
step
and press the EQ button for the frequency
1
band that you want to adjust.
Press DIMMER repeatedly on the remote
control.
The brightness of the front panel display will change in
the order shown below.
AUTO
1 (bright)
2 (medium)
back to AUTO
When AUTO is set, the brightness of the front panel display is
adjusted automatically with the Illumination sensor (+ P. 3).
Ensure that the sensor is not covered.
Connecting a USB device such as a smartphone or tablet
computer to the CHARGING port on this unit charges the
connected device (power supply of up to 5V/1.0A is
supported). Charging is possible even when the unit is
off.
Prepare a USB cable that is compatible with the USB
device.
• Charging may not be possible depending on the USB device.
• Yamaha will not be held responsible for any damage to the
USB device or data loss occurred while using this unit.
3 (dim)

Publicidad

Tabla de contenido
loading

Tabla de contenido