Turning On The Power; Auto Standby - Yamaha Restio ISX-80 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Turning on the power

Plug the power cable into the wall outlet
A
and press
.
• The unit turns on.
• Press
A
again to turn off (standby mode).
• By setting the CLOCK switch on the side (
the clock display is on or off, the status is "Standby" or
"Eco standby," respectively (see the table on the right).

Auto standby

Auto standby can be turned on /off in the
following procedure.
1
While pressing SOURCE of the unit,
plug the power cable into an outlet.
2
Press and hold SOURCE.
• The front panel display shows "ON" or "OFF."
P.6), when
Status in standby/eco standby
Standby
Setting of the clock
Yes
Enable/disable the alarm
Yes
Control from the app
Yes
Clock display
Yes
Network connection
Yes
Bluetooth connection
Yes
• Set the CLOCK switch to "ON" when you use the
"MusicCast CONTROLLER" app.
• When you turn on the unit for the first time after
purchase, the Wi-Fi indicator blinks and the unit
automatically starts to search iOS device (
• When the auto standby is on (default setting), the
unit will automatically go into the standby state
under the following conditions.
- When the unit produces no sound of audio
input and is not operated for about 20 minutes
at selecting Bluetooth or NET as the source.
- When the unit has passed for 8 hours in the
absence of operation regardless of the audio
input.
Preparations
Eco
standby
No
No
No
No
No
No
P.16).
13
En

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido