Performing Pairing And Playing Back Music - Yamaha Restio ISX-80 Manual De Instrucciones

Performing pairing and
playing back music
1
Press to set the source to
.
2
Turn on the function on
your device.
3
In the setting of the device,
select the unit (network name of the
unit).
• After pairing is complete, the
( P.5) lights up when a
established.
• If the device does not connect to the unit
automatically after the pairing is completed,
select the unit (network name of the unit) again in
the setting on your device.
• For details, see the owner's manual of your device.
4
Play back music on your device.
1
indicator
connection is
Indicator
2 3 4
, ,
Listening to music via Bluetooth connection
• If another device is already connected to the unit,
press and hold to terminate the
connection, then perform pairing with the new
device.
• You can check or change the network name of
this unit with "MusicCast CONTROLLER."
• If a passkey is required during the pairing
operation, enter the number "0000."
25
En