Setting The Date And Time - Dimplex ENGDL20 S E Manual De Instrucciones

CAUTION:
In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance
must not be supplied through an external switching device, such as a timer, or connected to a switch that
is regularly switched on and off by the utility.

Setting the Date and Time

To set the date and time on the heater;
1. Press the Menu button
2. Press ^ button 4 times
3. Press Enter when the Date & Time icon is blinking
4. Press Enter to set Time
5. Press v and ^ to set the Hour, press Enter
6. Press v and ^ to set the Minutes, press Enter to confirm the time
7. Press v and ^ to set the Day, press Enter
8. Press v and ^ to set the Month, press Enter
9. Press v and ^ to set the Year, press Enter to confirm the date
Modes of Remote Operation
User Timer:
Provides greatest flexibility to the user. Four times slots are available throughout the
day and these can be customised for each day of the week. See "How to adjust the timer modes" for
instructions on adjusting these from the factory default time periods & temperatures.
Manual Mode:
This mode heats the room to the temperature you have set the remote control to.
Frost Protection:
provide protection against frost as indicated by the frost icon.
Choosing and Setting a Mode
User Timer - To re-programme the factory default Timer Modes:
1. Press Menu Button
2. Press ^ once to the schedule Icon is blinking. Press Enter
3. Press ^ Twice then press Enter
*Days of the weeks are now displayed at the top of the screen*
Day 1 = Monday
Day 2 = Tuesday
Day3 = Wednesday
Day 4 = Thursday
Day5 = Friday
Day 6 = Saturday
7
This mode will maintain a room temperature to 7ºC. This mode should be used to