Craftmade Ellington BTY52ABZC5 Manual Del Usuario página 6

5. Fan Assembly. (cont.)
With the hanging bracket secured to the outlet
box and able to support the fan, you are now
safety cable loop
ready to hang your fan. Grab the fan firmly with
wood
two hands. Slide downrod through opening in ceiling
joist
hanging bracket and let hanging ball rest on
the hanging bracket. Turn the hanging ball slot
wood screw
and washer
until it lines up with the hanging bracket tab.
safety cable
WARNING: Failure to align slot in hanging ball
with tab in hanging bracket may result in
serious injury or death.
hanging bracket tab
Tip: Seek the help of another person to hold
the stepladder in place and to help lift the fan
hanging ball slot
up to you once you are set on the ladder.
Find a secure attachment point (wood ceiling
joist highly recommended) and secure safety
motor housing
cable. It will be necessary to use a heavy duty
wood screw, washer and lock washer (not
supplied) with the safety cable loop. If
necessary, adjust the loop at the end of the
safety cable. The loop at the end of the safety
cable should just fit over the threads on the
wood screw. Extra cable slack can be left in
ceiling area.
page 5