Inserting Batteries - LaserLiner SmartLine-Laser G360 Manual Del Usuario

!
When transporting always switch off all lasers, secure the pendulum and set the slide switch
to "OFF"!
1

Inserting batteries

Open the battery compartment and insert
batteries (4 x type AA) according to the symbols.
Be sure to pay attention to polarity.
1
2
Horizontal and vertical levelling
Release the transport restraint,
set slide switch (3) to "ON".
The laser cross will appear.
The laser lines can be switched
with the selector button.
10
EN
5
2
6
a b
3
4
1
2
3
7
4
5
6
7
LASER LASER
– +
+ –
Laser output windows
Battery compartment
(backside)
Slide switch
a ON
b OFF / Transport lock /
Slope mode
5/8" tripod threads (bottom)
LED levelling
red: levelling off
green: levelling on
Laser line selection button;
Hand receiver mode on / off
LED hand receiver mode
LASER LASER