General Safety Instructions - LaserLiner SmartLine-Laser G360 Manual Del Usuario

Completely read through the operating instructions, the "Warranty and Additional Information"
!
booklet as well as the latest information under the internet link at the end of these instructions.
Follow the instructions they contain. This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
Green 360° line laser with horizontal laser circle, vertical line and slope function
– The horizontal laser line creates a continuous 360° laser line with the vertical lines
aligned perpendicular to it. Ideal for almost any alignment job.
– Individually switchable laser lines
– Out-Of-Level: is indicated by optical signals when the unit is outside its self-levelling range.
– Additional slope function to align angled surfaces

General safety instructions

– The device must only be used in accordance with its intendedpurpose and within the scope of the
specifications.
– The measuring tools and accessories are not toys. Keep out of reach of children.
– Modifications or changes to the device are not permitted, this will otherwise invalidate the approval
and safety specifications.
– Do not expose the device to mechanical stress, extreme temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its functions fail or the battery charge is weak.
Safety instructions
Using class 2 lasers
Do not stare into the beam!
Class 2 laser < 1 mW · 515 nm
– Attention: Do not look into the direct or
reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser
radiation, they should shut their eyes and
immediately move away from the beam.
08
EN
Laser radiation!
EN 60825-1:2014
– Under no circumstances should optical
instruments (magnifying glass, microscope,
binoculars) be used to look at the laser
beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be
covered whilst laser devices are in operation.
– In public areas shield off the laser beam with
barriers and partitions wherever possible and
identify the laser area with warning signs.