Honeywell MILLER RFID Tags Guia De Inicio Rapido página 3

INSTRUCTIONS FOR USE
1.0 Purpose and Applications
Honeywell Industrial Safety supplies three
options for RFID Tags to affix to its Personal
Protective Equipment (PPE) and to other
approved safety or industrial equipment:
1. General Purpose Off-Metal RFID Label (Fig. 1)
2. General Purpose On-Metal RFID Label (Fig. 2)
3. Universal On/Off-Metal RFID Hard Tag (Fig. 3)
WARNING
Do not use tags in any application that may
lead to an unsafe condition, including po-
tentially impacting the ability of the equip-
ment to function properly.
Do not use tags in any application that con-
flicts with the manufacturer's instructions
provided with the PPE or other equipment.
RFID SKU
Tags (Pkg. Qty.)
GTAG/RFID
(25)
MTAG/
RFID
(25)
HTAG/RFID
(25)
Specifications
(Dimensions/Materials)
1.85" x 2.007" (47mm
x 51mm); 0.009"
(0.23mm) thick;
2 Mil White Polyester TC
Standard tag size of
2.875"x1.375" (73mm
x 34.9mm) ; 0.085"
(2.16mm) total thickness;
Subsurface printing on
durable polyester
1.06" (27mm)x 1.06"
(27mm) x 0.21"
(5.33mm); High-quality
engineering plastics
2.0 Tag Attachment Methods
Do not fix tags over equipment markings
or labels.
Do not fix tags to equipment in a location
that may interfere with the equipment's
ability to function properly or with the us-
er's ability to properly inspect equipment.
Do not use tag attachment methods other
than those listed in instructions and/or
approved by Honeywell Industrial Safety.
• Always ensure tag is properly attached and
easily accessed with the tag reading device to
ensure reliable reads.
• Always refer to the manufacturer's instructions
provided with the equipment to be tagged to
ensure all guidelines and restrictions are fol-
lowed with regard to attachment of a tag.
2.1 General Purpose Off-Metal RFID Tag
Remove backing from tag and adhere to a
clean, dry, smooth, non-metal surface. Surface
may be flat or curved; however, for curved
surfaces, ensure RFID antenna is not bent.
Once tag is adhered to surface, do not remove
or attempt to relocate tag as removal will
likely damage the RFID antenna and render
the tag unusable.
Affixing Methods Recommended
General purpose Plastic, Wood,
permanent adhesive Cardboard, and
other Non-Metal
Surfaces
NOT APPROVED
for Metal
Permanent pressure Any Surface
sensitive acrylic Materials, includ-
adhesive ing Metal
Cable key rings in- Any Surface
cluded [4" (101.6mm) Materials, includ-
length, stainless steel] ing Metal
Other approved methods
include: adhesive fixings
such as polyurethane
adhesives, epoxies, and
silicone sealants; or
mechanical fixings such as
screws (size M3), pop rivets,
or plastic rivets (size 3mm)
WARNING
Permitted/
Application
Advantages
Surfaces
Inlay Design; Flexible*
*Do not bend RFID antenna.
Inlay Design; Semi-Flexible*;
Excellent Read Range
Regardless of Surface
*Do not bend RFID antenna.
Versatile and Durable
Design; Exceptional Per-
formance on Any Material;
Long Service Life
IP68 Rated
3