Use Of The Digital Timer - CONTINENTAL EDISON CEF64PIX Manual De Usuario

190°C.
start operating. This function is used for
faster grilling of thicker food and for grilling
of food with a larger surface area. Both the
upper heating elements and grill will be
energised along with the fan to ensure even
cooking. Use the upper shelves of the oven.
Lightly brush the wire grid with oil to stop
food sticking and place food in the centre of
the grid. Always place a tray beneath the
food to catch any drips of oil or fat. It is
recommended that you preheat the oven for
about 10 minutes.
Warning: When grilling, the oven door
must be closed and the oven
temperature should be adjusted to 190°C.
Pyrolytic Cleaning Function: This
function allows you to clean the
inside of the oven thoroughly.
Warning: Before activating the
pyrolytic cleaning function, remove any
excessive spillage and make sure that the
oven is empty. Do not leave anything inside
the oven cavity in order to prevent damage.
• Before activating the pyrolytic cleaning
function, remove the wire oven shelves
and shelf supports (if available) and
ensure the oven door is closed.
• The oven door will lock when the
pyrolytic function starts.
• When the pyrolytic cleaning function
is on, it is advisable not to use a hob if
it is fitted above the oven. This could
cause overheating and damage to both
appliances.
• During the pyrolytic cleaning cycle the
oven door will become hot. Children
should be kept away until it has cooled.
• At the end of pyrolytic cleaning process,
the display will show the time of day.

4.2 Use of the Digital Timer

Time adjustment
The time must be set before you start using
the oven. Following the power connection,
the symbol "A" and "000" will flash on the
display screen.
Double Grill and Fan
Function: The oven's
thermostat and
warning lights will
switch on, and the grill,
upper heating
elements and fan will
Audible warning time adjustment
The audible warning time can be set to
any time between 0:00 and 23:59 hours.
The audible warning time is for warning
purposes only, the oven will not be
activated with this function.
When the timer reaches zero, an audible
warning will sound and the symbol
EN - 15
1. Press the "+" and "-"
buttons simultaneously.
The dots in the middle
of the screen will start
to flash.
2. Adjust the time using
the "+" and "-" buttons
while the dots are
flashing.
3. After a few
seconds, the dots will
stop flashing and will
remain illuminated.
1. Press "MODE". The
symbol will start
flashing and "000" will
appear.
2. Select the desired
time period using the
"+" and "-" keys while
is flashing.
3. The symbol will
remain illuminated, the
time will be saved and
the warning will be set.
will