CONTINENTAL EDISON CEF64PIX Manual De Usuario página 83

flash. Press any key to stop the sound and
the symbol will disappear.
Semi-automatic time adjustment
(cooking period)
This function helps you to cook for a fixed
period of time. A time range between 0 and
10 hours can be set. Prepare the food for
cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and the symbol "A" will flash. Turn both
control knobs to the "0" position and press
any button on the timer to stop the sound.
The symbol will disappear and the timer will
switch back to manual function.
Semi-automatic time adjustment
(finishing time)
This function automatically starts the oven
so that cooking will finish at a set time. You
can set an end time of up to 10 hours after
the current time of day. Prepare the food for
cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
2. Press "MODE" until
you see "dur" on the
screen. The symbol
"A" will flash.
3. Select the desired
cooking time period
using the "+" and "-"
buttons.
4. The current time of
day will reappear on
the screen, and the
symbols "A" and
will remain illuminated.
When the timer reaches zero, the oven will
switch off, an audible warning will sound
and the symbol "A" will flash. Turn both
control knobs to the "0" position and press
any key on the timer to stop the sound. The
symbol will disappear and the timer will
switch back to manual function.
Full-automatic programming
This function is used to start cooking after
a certain period of time and for a certain
duration. A time of up to 10 hours after the
current time of day can be set. Prepare the
food for cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
EN - 16
2. Press "MODE" until
you see "end" on the
screen. The symbol
"A" and the current
time of day will start to
flash.
3. Use the "+" and
"-" buttons to set the
desired finishing time.
4. The current time
will reappear on the
screen, ´and the
symbols "A" and
will remain illuminated.
2. Press "MODE" until
you see "dur" on the
screen. The symbol
"A" will flash.