Aqua Marina TOMAHAWK Guia Del Usuario página 11

H
Blade
KAYAK PADDLE ASSEMBLY (*Optional for AIR-K)
1. Place the blade piece into the shaft by unlocking the microlock. Snap it into
place and secure the microlock into the shaft hole.
2. Join the 2 shafts together by securely snapping the shaft pieces into place.
3. To disassemble, reverse the assembly steps.
Note: It's not necessary to detach the paddle blades from the shafts.
Blade
CANOE PADDLE ASSEMBLY (*Optional for AIR-C)
1. Join the 2 shafts together and easily adjust the shaft length by using the clamp
system.
2. Clamp to secure the length and reduce any play.
3. To disassemble, reverse the assembly steps.
NOTE: Always drain the water left in the paddle shaft after each use.
PADDLE ASSEMBLY
Shaft
Shaft
11
Shaft
Shaft
Blade