Aqua Marina TOMAHAWK Guia Del Usuario página 7

Step 1 Step 2
Step 2
HIGH PRESSURE VALVE
INFLATE THE KAYAK/CANOE
Inflate the inflatable keels (for AIR-C only), side chambers and air floor in
sequence as shown in the picture.
1. Attach the pressure gauge and the pump hose to the gauge housing on the pump
and secure it tightly. The pump can be switched between double action mode and
single action mode.
2. HIGH PRESSURE VALVE
Unscrew the valve cap, push button in and turn it clockwise to make sure that the
valve is in the "Pin Out" position.
KEEL AIR VALVE (AIR-C)
Open external cap and pull firmly to extend out. Start pumping air into the
inflatable keel by sliding the pump piston up and down for ONLY ONE ROUND.
3. Inflate the drop-stitch air chambers to the maximum air pressure (10 psi/ 0.68 bar).
TIP: If the pump piston starts to squeak, apply some lubrication oil on the piston shaft.
MAXIMUM OF 10PSI FOR THIS PRODUCT. DO NOT OVER INFLATE
BEYOND 10PSI. THIS WILL VOID YOUR WARRANTY.
Step 3
KEEL AIR VALVE
DOUBLE
ACTION
7
AIR-C
Step 1
SINGLE
ACTION