Movement RTR Manual De Instrucciones página 88

OPERATIONAL INSTRUCTIONS
LOADING SYSTEM
The function of the equipment is to make the bicycle pedal lighter or heavier. The heavier
the load, the lower the lighter load the bike will be. The load can be adjusted according
to the user's training level. In conjunction with the load selector, the pedal rotation also
influences the desired load, the greater the pedal rotation, the load increases
proportionally.
LOAD SELECTION
To select the desired load simply press the + / -
buttons on the handlebars on the side of the
seat. In the electronic module there are also the
+ / - buttons to also increase or decrease the
load of the equipment.
SEAT
The seat can be adjusted to better fit the user.
RTU SEAT ADJUSTMENT
To regulate the RTU seat, simply unscrew the
regulator pin and lower or raise the seat. When
you find the point you want to pin the seat,
simply loosen the selector pin and thread to lock
the seat in the desired position.
SEAT ADJUSTMENT RTR To adjust the seat of the
RTR simply pull the lever up and move the seat
forward or backward until the optimum
adjustment is found. To lock the seat, just release
the lever.
36