Casals REINTAIR S 300 AC Manual De Uso Y Mantenimiento página 56

High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 28: End of time programming period 1 TUESDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 29: Start time schedule period 2 TUESDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 30: End of time programming period 2 TUESDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 31: Start time schedule period 1 WEDNESDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 32: End of time programming period 1 WEDNESDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Low byte: Minutes.
The value that is sent is the value of the minutes (0min to 59min, 0xAA [170dec]: Not defined) in 16-bit binary.
Default value: 0xAA [170dec] [Not defined].
Record 33: Start time schedule period 2 WEDNESDAY (hour: minutes) [read / write].
0xAAAA: Time not defined (- -: - -).
High byte: Hour.
The value that is sent is the time value (0h to 23h, 0xAA [170dec]: Not defined) in 16-bit binary
Default value: 0xAA [170dec] [Not defined].
32
CV05_2020-Rev.01