Rinse Aid - Fulgor Milano F6DWT24SS2 Manual De Usuario

7.3 RINSE AID

C
The rinse aid used in
dishwashers is a special
combination that aims to
increase drying efficiency
and prevent water or lime
stains on the washed items.
For this reason, care must
be paid to have rinse aid in
the rinse aid reservoir and
to use rinse aids produced
specially for dishwashers
only.
1. Open the lid of the rinse aid
reservoir with the help of the latch.
2. Fill the reservoir until "MAX" level.
3. Slightly press the point (B) of the
reservoir lid to close it.
4. If there are stains on tableware
items after washing, level must
be increased and if there is a blue
trace after wiping them by hand, it
must be decreased. This is set to
position 3 as factory default.
C
The rinse aid adjustment is
described under "Adjusting
the amount of rinse aid" in
the section for operating the
machine.
C
Wipe clean any spilled
rinse aid outside the
reservoir. Rinse aid that
spilled accidentally will
cause foaming and it will
eventually decrease washing
performance.
29
USA