Use - Predator PUR30 Instrucciones De Uso

3. Bellow mentioned is how the air quality indicator light works.
PM 2.5 Range
1. Standby.
Insert the plug of air purifi er into power source, all the indicators will lighten. After one second, air purifi er
is in standby mode.
2. "Power" on/off
Press button once, "Power" indicator lightens, after three seconds, the air purifi er turns into Speed "1". The
blue light will lighten.
3. "Speed"
Press "Speed" button to select speed setting form "Auto mode" -> "1" -> "2" -> "Sleep mode".
Press "Speed" to "S" (sleep) mode, after 5 seconds, all the lights are off, only "S" light is semi-lighting. Press
any button to quit "Sleep" mode.
In the setting Automatic the integrated smart sensor (Intelligent Particle Sensor TM) measures and regulates
air quality automatically. The fan controlled by a sensor anticipates automatically to what extent indoor air is
polluted by particles size PM2.5 and adapting to the 3 different speeds accordingly.
4. Switch off the light / Filter reset:
In the boot mode, press
Press again, all the lights will on. When all the lights are off, the function is working normally.
Once air purifi er is powered on, "Filter Reset" will count down. If air purifi er is powered off and restart, it
continues to count down. "Filter Reset" is designed for 2000 hours. Once the time is accumulated to 2000
hours, "Light button"
After replace with new fi lter, press "Light button"
be off.
5. Ionizer
When switch on the air purifi er, the "ionizer" function is working
www.glaziar.com / info@glaziar.com
0-75
76- 150
>150
button, all the lights are off, only
will fl ash continually.
Air Quality
Good
Fair
Poor

USE

light is semi-lighting.
for 3 seconds, then "Light button"
Light indication
Green
Yellow
Red
indicator will
14