DeFelsko PosiTector RTR 3D Manual De Instrucciones página 19

Sync Batches
Select batches to flag them for synchronization to the PosiTector
App. Sync Batches is useful when connecting a new device to a
gage with pre-existing batches, since only batches created while
Bluetooth Smart is enabled are automatically selected.
Selected batches are synchronized when the next reading is taken
in a batch flagged for synchronization, or when the Sync Batches
option is selected at the bottom of the list of selected batches.
If Bluetooth Smart is disabled or disconnected, data from
batches selected in the Sync Batches menu are held in a queue
until communication with the PosiTector App is re-established.
Send Batches
Transfers selected batches to the PosiTector App. Send Batches is
useful when switching between devices, as only readings and
batches that have yet to be synchronized with any smart device are
synchronized automatically.
The Send Batches option is visible in the menu when the Gage is
connected to a smart device running the PosiTector App.
BLE Keyboard
(Advanced models only)
When enabled and connected to a computer, the PosiTector will be
recognized as a wireless Keyboard. Readings are sent to the
computer as they are taken, emulating keystrokes, followed by a
carriage return.
Updates
Determines if a software update is available for your Gage.
See www.defelsko.com/update
WARNING:
The Gage will perform a Hard Reset after an update.
(see pg. 9)
18