Menu Operation - DeFelsko PosiTector RTR 3D Manual De Instrucciones

Typical Display
By Default, the PosiTector
RTR 3D displays a three-
dimensional (3D) image of
the replicated surface, H
Spd, Ra and Sa parameters.
Displayed parameters and
images may be modified from
the Analysis Setup (pg. 13)
and Setup (pg. 9) menus.
To access the Menu, power-up the gage, then press the center nav-
igation button
navigate the menu. If desired, touch screen functionality can be
disabled within the Setup menu (See Touch, pg. 10).
Select a menu option by touching it, or use the
to highlight the desired option and press
On menus longer than one page, the current page number is dis-
played below the menu name. Navigate between pages using
when the first menu item is selected, or
item is selected. If using touch, navigate between pages by touch-
ing or , or by swiping up or down.
Press the button or swipe right to return to a previous screen.
Select Exit to close the Menu.
,
L

Menu Operation

. Either the keypad or touch screen can be used to
When a Menu option is highlighted, the
icon indicates on-gage help is available.
Press or touch the
help. A formatted PDF containing all on-
gage help items is available at
www.defelsko.com/help
NOTE:
Update your gage to ensure that you
have the latest on-gage help information.
indicates that a sub-menu exists for the
Menu option. Select the option to display its
sub menu.
Tape Grade
Linearized
Peak Height
Roughness
Average 3D
Default Display
to select it.
icon to display the
2
3D Image
Areal Peak
Roughness
Average 2D
and buttons
when the last menu
Density