auna CDC-200 Manual De Instrucciones página 26

EN
DAB mode – choosing menu options
If the DAB Digital Radio is in DAB mode, press and hold MENU/INFO
button to enter the menu list. Press the Next/ Previous button to select
option through the list of menu. Then, stop at your preferred option
and Push the ENTER button to confirm. The menu options are: Full scan,
system,Prune,DRC, Manual tune, Preset Store,Preset Recall,
Full scan
Under menu list, press the Next/ Previous button to select "Full scan"
through the list of menu, Push ENTER button to confirm and full scan starts
automatically. Once a scan is completed,the radio returns to play the
previously-selected station or first station on the station list.
Note: if no radio station found, it shows "No DAB Station". For a better
reception, extend the antenna or do the full scan again in another place.
Manual tune
As well as the normal method of scanning, you can also manually tune
to a particular channel/frequency. This can be useful for adjusting your
antenna to achieve the best possible reception and scanning a particular
channel to update the station list. Under menu list, press the Next/ Previous
button to select "Manual tune" through the list of menu, Push Select button
to confirm. Then press the Next/ Previous button to select a particular
channel/frequency and then Push ENTER button to confirm the setting.
The display shows a live indication of the received signal strength on the
selected frequency. Adjustments to your antenna will be manifested in the
received signal strength displayed.
DRC (Dynamic range compression)
This function reduces the difference between the loudest and quietest
audio being broadcast. Effectively, this makes quiet sounds comparatively
louder and loud sounds comparatively quieter. Options: off(default)/high/
low Under menu list, press the Next/ Previous button to select "DRC"
through the list of menu, Push ENTER button to confirm. Then pres the
Next/ Previous button to select a particular setting and Push ENTER button
to confirm the setting.
Note: DRC only works if it is enabled by the broadcaster for a specific
station.
Prune
This removes all invalid stations indicated in the station list with a '?' in front
of the station name. Under menu list, press the Next/ Previous button to
select "Prune" through the list of menu, Push ENTER button to confirm. Then
press the Next/ Previous button to select <Yes>, and Push ENTER button to
confirm.
26