auna CDC-200 Manual De Instrucciones página 28

EN
28
FM mode – choosing menu options
1. If the DAB Digital Radio is in FM mode, press and hold MENU/ INFO
button to enter the menu list. Press the Next/ Previous button to select
option through the list of menu. Then, stop at your preferred option and
Push the ENTER button to confirm. The menu options are: scan setting,
Preset Store,Preset Recall, system.
2. Scan setting – by default, FM scans stop at any available station (All
stations). This may result in poor quality audio from weak stations.
Options: Strong stations only / All stations Under menu list, press the
Next/ Previous button to select a particular option in "Scan setting",
then Push the ENTER button to confirm the change to new setting.
PRESET button
PRESET 30 DAB STATIONS AND 30 FM FAVORITE STATIONS
1. Store a station to the preset list – to store a station, selected your
2. desired radio station, then press and hold the PRESET button for a
seconds until the LCD display "Preset store #:(Empty)", or"#: saved radio
station" . Either press the Next/ Previous button to select your desired
station preset number, Push on the ENTER button to confirm your
selection, the display will show "Preset # Stored".
Recall a station from the preset list
1. To recall a preset station, press the "PRESET" button once, either the
Next/ Previous button to select presets station that you have stored.
When the display shows your desired preset number, Push ENTER
button to confirm.
Note: If you choose a preset that hasn't been allocated a station, then
"Empty" will be displayed.
NEXT TU+/ TU- PREVIOUS button
Choosing radio stations or options
1. If the DAB Digital Radio is in DAB mode, press Next/ Previous button
to cycle through the radio station list when you are listening. Or press
Next/ Previous button to cycle through the menu list for options.
2. If the DAB Digital Radio is in FM mode, press Next TU+ / TU- Previous
button to manual adjust the frequency by 0.05MHz. Or you can press
and hold TU+/- button to auto-scan station. Or press Next / Previous
button to cycle through the menu list for options.