Technical Data; Care Instructions - IKEA TRÅDFRI Manual De Instrucciones

Ocultar thumbs Ver también para TRÅDFRI:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING:
• The wall socket must be located near
the equipment and must be easily
accessible.
• Only use in dry locations.
• Children should be supervised to
ensure they do not play with the
product.
• If the device is damaged it shall be
destroyed.
• Never use a damage or faulty USB
cable for charging, since this can
damage the appliance and harm your
device.

TECHNICAL DATA

Type: E1746 wireless Signal Repeater
Input: 5.0V DC
Range: 10 m in open air
For indoor use only
Operating frequency: 2405-2480Mhz
Output power: 3 dBm
Instructions for use
• Connect the power adapter into the
wall socket, insert the Signal Repeater
into the free slot.
• When charging only use a
recommended USB cable for your
device and replace faulty cables
imminently.
Good to know
• Can be used to charge the wireless
roller blind battery-cell.
• USB cable length and quality
influences charging speed and
performance.
• Devices may get warm during
charging; this is completely normal
and they will gradually cool down
again after they are fully charged.
• Storage temperature: -20°C to 25°C
(4°F to 77°F).
• Operating temperature: 0°C to 40°C
(32°F to 104°F).
• Unplug the power adapter from the
power source before cleaning and
when it is not in use.
Recommended precautionary measures
and technical data, see the back of the
power adapter.

CARE INSTRUCTIONS

To clean the Signal Repeater and the
Power Adapter wipe with a soft dry cloth.
NOTE!
Never use abrasive cleaners or chemical
solvents as this can damage the
product.
Save these instructions for
future use.
Product servicing
Do not attempt to repair this product
yourself, as opening or removing covers
may expose you to dangerous voltage
points or other risks.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido