Cleaning The Filter - Brandson Equipment 305040 Manual Del Usuario

5. Slide the water tank back into position, and fix the water pump in its hold-
er, and turn the water pump lock by 90° in the counter-clockwise direction
to keep the water pump firmly in position.
6. Push the water tank back in and turn the water tank lock by 90° in the
counter-clockwise direction to keep the water tank firmly in position.
Note: If the water level is too low, you will hear three beeps and the air cooling
indicator lamps flashes till the air cooling is switched off, or the water tank is
refilled.
Make sure that you always empty the appliance completely when it is not being
used.
8. Cleaning and Care
Caution! Pull out the power plug from the socket before starting the cleaning
process!
Use a slightly moist cloth for cleaning (wetted with water). Never immerse the
appliance in water for cleaning. This could lead to electric shock or fire!

8.1 Cleaning the filter

1. Clean the air filter of the appliance once every two weeks. The air filter is
located inside the filter housing (6) / the filter flap.
2. Remove the filter housing carefully from the back of the appliance.
3. Remove the honeycomb from the air filter and take the air filter out of the
filter housing.
4. Use a brush or vacuum cleaner to remove dust or particles from the filter.
5. Then replace the air filter and the honeycomb filter into the filter housing
and mount it at the back of the appliance.
English
-
37